You would like to exchange the plaque on the back of your product?

HOW TO MOUNT THE PLAQUE TO YOUR SUITCASE

1. Open your suitcase. There is a zipper on the bottom of the lining bag, which you should open.
2. You will now see the black counter plate. If the plate is covered by a protective cover, loosen the protective cover so that crosshead screws can be seen.
3. Loosen the crosshead screws and remove the old plaque from the compartment.
4. Insert your new plaque and refit the counter plate. Fasten the screws.

Fertig ist Ihr Unikat!

HOW TO MOUNT THE PLAQUE ON YOUR BEAUTYCASE

1. Open the beauty case. There is a lining bag in the lid, which opens with the zipper.
2. Undo the Velcro fastener in the lower part of the lid to reveal a counter plate.
3. Loosen the crosshead screws and remove the old plaque from the compartment.
4. Insert your new plaque and refit the counter plate. Fasten the screws..

Fertig ist Ihr Unikat!

IN A FEW STEPS TO THE EXCLUSIVE UNIQUE

HOW TO MOUNT THE PLAQUE TO YOUR SUITCASE

1. Open the case and place it on a clean surface.
2. You will see a zip on the underside of the lining bag. Open it so that the padded metal counter plate is visible.
NOTE: If your case has a protective cover covering the metal counter plate including the cross-head screws, please carefully remove the protective cover until the cross-head screws are visible.

3. Now loosen the two cross-head screws with a suitable screwdriver.
4. The old plaque is now detached so that you can place the new plaque in the recess of the shell.
5. Now place the counter plate back in place and secure the metal counter plate with the two screws.
6. If your case has a separate protective cover, as described in point 2, stick this back over the metal counter plate.

HOW TO MOUNT THE PLAQUE ON YOUR BEAUTYCASE

1. Open the beautycase and place it on a clean surface.
2. Open the zip of the lining bag located in the lid and undo the Velcro fastener in the lower part of the lid to reveal a metal counter plate.
3. Now loosen the two screws with a suitable screwdriver.
4. The old plaque is now detached so that you can place the new plaque in the recess of the bowl.
5. Now replace the counter plate and secure the metal counter plate with the two screws.